ARCHIVES
Research Article
Design and Fabrication of Portable Spot Welding Machine
Adithya Krishna Ganesh. K1
B. Dileep2
A. Nithish3
K. Ganesh4
T. Haritha5
1234UG students, Department of Mechanical Engineering, NRI Institute of Technology, Pothavarappadu, Eluru District, AP, India. 5Associate Professor, Department of Mechanical Engineering, NRI Institute of Technology, Pothavarappadu, Eluru District, AP, India.
Published Online: March-April 2023
Pages: 103-115
Cite this article
No DOIReferences
[1]. Anike A. Nimje, Akshay S. Naik, Ashish S. Meshram, Nitesh D. Bisen, Pranav R. Panchbuddhe, Asst.Prof Sandip D. Chahande “PORTABLE SPOTWELDING MACHINE”, IJARIIE, International Journal of Advance Research and Innovative Ideas in Education, Vol-8 Issue-3, IJARIE-ISSN(0)-2395-4396, Page No.: 3152–3155, 2022.
[2]. Mahesh Kumar Pimpale, Ms.Kanchan Daulat Ugale, Mr.S. F.Shewale "FABRICATION OF PORTABLE SPOT WELDING MACHINE", IJARSCT,
International Journal of Advanced Research in Science, Communication, and Technology, ISSN (Online) 2581-9429, DOI: 10.48175/JARSCT-2782,
Page No.: 514-518, February 2022.
[3]. A.Gowtham Rajan, B.Praveen, K.Vignesh Sundar and S.Karthick, “DESIGN AND FABRICATION OF PORTABLE SPOT-WELDING MACHINE FOR
SHEET METAL OPERATION”, IJETER, International Journal of Emerging Trends in Engineering Research, ISSN 2347-3983,
https://doi.org/10.30534/ijeter/2021/14942021, Page No.: 421-424, April 2021.
[4]. Giridhar N, Saikrishna , Chethan kumar. R, Sharath. V, Gururaja Sharma. T "DESIGN AND FABRICATION OF PORTABLE AUTOMATIC SPOTWELDING MACHINE", J E T I R, Journal of Emerging Technologies and Innovative Research, Page No.: 211-216, 2021.
[5]. Shaymaa Abdul Khader Al-Jumaili, Raed A.M Al-Mamoori "A REVIEW ON RESISTANCE SPOT WELDING OF STEEL MATERIAL", IJSRED,
International Journal of Scientific Research and Engineering Development, ISSN: 2581-7175, Volume2 Issue 2, Page No.: 403-415, Apr 2019.
[6]. Nitipat. E, Sorarad. H, Chalermpol. R "DEVELOPMENT OF A PORTABLE SPOT WELDER", The 16th International Conference on Electrical
Engineering /Electronics, Computer, Telecommunications, and Information Technology, 978-1-7281-3361- 4/19/S31.00, Page No.: 561-564, 2019.
[7]. Mallaradhya H. M, Vijay Kumar. M, R. Ranganatha, Darshan. S & Lochan "RESISTANCE SPOT WELDING: A REVIEW". IJMPERD, International
Journal of 33 Mechanical and Production Engineering Research and Development ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, Issue 2, Page No.:
403-418, April 2018.
[8]. P.Sreenivasulu, Rahamath Basha Shaik, K. Hari Brahmaiah “FABRICATION AND ANALYSIS OF PORTABLE SPOT WELDING MACHINE”. IJCESR,
international journal of current engineering and scientific research, ISSN (PRINT): 2393-8374, (ONLINE): 2394-0697, VOLUME-5, ISSUE-3, Page
No.: 43-49, 2018.
[9]. Miller “GUIDELINES FOR RESISTANCE SPOT WELDING”, Miller Electric Mfg. LLC, Page No.: 1-10, 2018.
[10]. Kunal Mehra, Abhishek Pushkar, Sahil Verma, Ashutosh Singh, Manash Dey, Dhruv Kumar "SPOT WELDING ELECTRODE ANALYSIS: A REVIEW".
IJERT, International Journal of Engineering Research & Technology, ISSN: 2278-0181, Vol. 7 Issue 11, Page No.: 28-32, November-2018.
[11]. Jithin Krishnan, Rethnagireeshwar R, Biju Benjamin, Nitha V Panicker and Biju Ramu A R "HIGH PRECISION RESISTANCE SPOT WELDING WITH
SUBDURAL ELECTRODES FOR ACUTE ELECTROCORTICOGRAPHY APPLICATIONS". IEEE, International Conference on Power, Control,
Signals, and Instrumentation Engineering, 978-1- 5386-0814-2/17/$31.00 ©2017 IEEE, Page No.: 1284-1287, 2017.
[12]. Rishabh Sharma, Vikas Kumar Jha, Deepak Kumar Singh, Ram BhajanKumar, Rajiv Kumar “FABRICATION OF PORTABLE SPOT WELDING
MACHINE”, IJIRST, International Journal for Innovative Research in Science & Technology, ISSN (online): 2349- 6010, Volume 3- Issue 05, Page No.:
59-62, October 2016.
[13]. Zoha Nasir, Dr.M.I.Khan “RESISTANCE SPOT WELDING AND OPTIMIZATION TECHNIQUES USED TO OPTIMIZE ITS PROCESS
PARAMETERS”. IRJET, International Research Journal of Engineering and Technology, ISO 9001:2008, Page No.: 887-893, 2016.
[14]. S. M. Manladan, I. Abdullahi, M.F. Hamza "A REVIEW ON THE APPLICATION OF RESISTANCE SPOT WELDING OF AUTOMOTIVE SHEETS
".IJET, International Journal of Engineering and Technology, ISSN: 1597-5835, Vol. 10 (2), Page No.: 20-37, 2015.
[15]. Sachin K Jadav, Jaivesh Gandhi "EXPERIMENTAL INVESTIGATION OF 34 RESISTANCE SPOT WELDING: A LITERATURE REVIEW", IJERT
International Journal of Engineering Research & Technology, ISSN: 2278-0181, Vol. 3 Issue 3, Page No.: 1503- 1506, March – 2014.
[16]. P. Podrzˇaj, I. Polajnar, J. Diaci, and Z. Kariz “OVERVIEW OF RESISTANCE SPOT WELDING CONTROL”. Science and Technology of Welding and
Joining, DOI 10.1179/174329308X283893, VOL 13 NO 3 Page No.: 215-224, 2008.
[17]. S. Aslanlar, A. Ogur, U. Ozsarac, E. Ilhan “WELDING TIME EFFECT ON MECHANICAL PROPERTIES OF AUTOMOTIVE SHEETS IN
ELECTRICAL RESISTANCE SPOT WELDING”, materials and design, Elsevier Ltd. All rights reserved. doi:10.1016/j.matdes.2007.09.004., Page No.:
1427-1431, 09 2007.
[18]. Y. Cho and S. Rhee “EXPERIMENTAL STUDY OF NUGGET FORMATION IN RESISTANCE SPOT WELDING”, AWS and WRC, Supplement to the welding journal, Page No.: 195s-201s, August 2003.
[19]. Y. Zhou, P. Gorman, W. Tan, and K.J. Ely "WELDABILITY OF THIN SHEET METALS DURING SMALL-SCALE RESISTANCE SPOT WELDING USING AN ALTERNATING CURRENT POWER SUPPLY". Journal of ELECTRONIC MATERIALS, Vol. 29, No. 9, Page No.: 1090-1099, 2000.
[20]. S. j. Na and S.W. Park “A THEORETICAL STUDY ON ELECTRICAL AND THERMAL RESPONSE IN RESIST1ANCE SPOT WELDING”. WELDING RESEARCH SUPPLEMENT, Supplement To The Welding Journal, Page No.: 233s-241s August 1996
[2]. Mahesh Kumar Pimpale, Ms.Kanchan Daulat Ugale, Mr.S. F.Shewale "FABRICATION OF PORTABLE SPOT WELDING MACHINE", IJARSCT,
International Journal of Advanced Research in Science, Communication, and Technology, ISSN (Online) 2581-9429, DOI: 10.48175/JARSCT-2782,
Page No.: 514-518, February 2022.
[3]. A.Gowtham Rajan, B.Praveen, K.Vignesh Sundar and S.Karthick, “DESIGN AND FABRICATION OF PORTABLE SPOT-WELDING MACHINE FOR
SHEET METAL OPERATION”, IJETER, International Journal of Emerging Trends in Engineering Research, ISSN 2347-3983,
https://doi.org/10.30534/ijeter/2021/14942021, Page No.: 421-424, April 2021.
[4]. Giridhar N, Saikrishna , Chethan kumar. R, Sharath. V, Gururaja Sharma. T "DESIGN AND FABRICATION OF PORTABLE AUTOMATIC SPOTWELDING MACHINE", J E T I R, Journal of Emerging Technologies and Innovative Research, Page No.: 211-216, 2021.
[5]. Shaymaa Abdul Khader Al-Jumaili, Raed A.M Al-Mamoori "A REVIEW ON RESISTANCE SPOT WELDING OF STEEL MATERIAL", IJSRED,
International Journal of Scientific Research and Engineering Development, ISSN: 2581-7175, Volume2 Issue 2, Page No.: 403-415, Apr 2019.
[6]. Nitipat. E, Sorarad. H, Chalermpol. R "DEVELOPMENT OF A PORTABLE SPOT WELDER", The 16th International Conference on Electrical
Engineering /Electronics, Computer, Telecommunications, and Information Technology, 978-1-7281-3361- 4/19/S31.00, Page No.: 561-564, 2019.
[7]. Mallaradhya H. M, Vijay Kumar. M, R. Ranganatha, Darshan. S & Lochan "RESISTANCE SPOT WELDING: A REVIEW". IJMPERD, International
Journal of 33 Mechanical and Production Engineering Research and Development ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, Issue 2, Page No.:
403-418, April 2018.
[8]. P.Sreenivasulu, Rahamath Basha Shaik, K. Hari Brahmaiah “FABRICATION AND ANALYSIS OF PORTABLE SPOT WELDING MACHINE”. IJCESR,
international journal of current engineering and scientific research, ISSN (PRINT): 2393-8374, (ONLINE): 2394-0697, VOLUME-5, ISSUE-3, Page
No.: 43-49, 2018.
[9]. Miller “GUIDELINES FOR RESISTANCE SPOT WELDING”, Miller Electric Mfg. LLC, Page No.: 1-10, 2018.
[10]. Kunal Mehra, Abhishek Pushkar, Sahil Verma, Ashutosh Singh, Manash Dey, Dhruv Kumar "SPOT WELDING ELECTRODE ANALYSIS: A REVIEW".
IJERT, International Journal of Engineering Research & Technology, ISSN: 2278-0181, Vol. 7 Issue 11, Page No.: 28-32, November-2018.
[11]. Jithin Krishnan, Rethnagireeshwar R, Biju Benjamin, Nitha V Panicker and Biju Ramu A R "HIGH PRECISION RESISTANCE SPOT WELDING WITH
SUBDURAL ELECTRODES FOR ACUTE ELECTROCORTICOGRAPHY APPLICATIONS". IEEE, International Conference on Power, Control,
Signals, and Instrumentation Engineering, 978-1- 5386-0814-2/17/$31.00 ©2017 IEEE, Page No.: 1284-1287, 2017.
[12]. Rishabh Sharma, Vikas Kumar Jha, Deepak Kumar Singh, Ram BhajanKumar, Rajiv Kumar “FABRICATION OF PORTABLE SPOT WELDING
MACHINE”, IJIRST, International Journal for Innovative Research in Science & Technology, ISSN (online): 2349- 6010, Volume 3- Issue 05, Page No.:
59-62, October 2016.
[13]. Zoha Nasir, Dr.M.I.Khan “RESISTANCE SPOT WELDING AND OPTIMIZATION TECHNIQUES USED TO OPTIMIZE ITS PROCESS
PARAMETERS”. IRJET, International Research Journal of Engineering and Technology, ISO 9001:2008, Page No.: 887-893, 2016.
[14]. S. M. Manladan, I. Abdullahi, M.F. Hamza "A REVIEW ON THE APPLICATION OF RESISTANCE SPOT WELDING OF AUTOMOTIVE SHEETS
".IJET, International Journal of Engineering and Technology, ISSN: 1597-5835, Vol. 10 (2), Page No.: 20-37, 2015.
[15]. Sachin K Jadav, Jaivesh Gandhi "EXPERIMENTAL INVESTIGATION OF 34 RESISTANCE SPOT WELDING: A LITERATURE REVIEW", IJERT
International Journal of Engineering Research & Technology, ISSN: 2278-0181, Vol. 3 Issue 3, Page No.: 1503- 1506, March – 2014.
[16]. P. Podrzˇaj, I. Polajnar, J. Diaci, and Z. Kariz “OVERVIEW OF RESISTANCE SPOT WELDING CONTROL”. Science and Technology of Welding and
Joining, DOI 10.1179/174329308X283893, VOL 13 NO 3 Page No.: 215-224, 2008.
[17]. S. Aslanlar, A. Ogur, U. Ozsarac, E. Ilhan “WELDING TIME EFFECT ON MECHANICAL PROPERTIES OF AUTOMOTIVE SHEETS IN
ELECTRICAL RESISTANCE SPOT WELDING”, materials and design, Elsevier Ltd. All rights reserved. doi:10.1016/j.matdes.2007.09.004., Page No.:
1427-1431, 09 2007.
[18]. Y. Cho and S. Rhee “EXPERIMENTAL STUDY OF NUGGET FORMATION IN RESISTANCE SPOT WELDING”, AWS and WRC, Supplement to the welding journal, Page No.: 195s-201s, August 2003.
[19]. Y. Zhou, P. Gorman, W. Tan, and K.J. Ely "WELDABILITY OF THIN SHEET METALS DURING SMALL-SCALE RESISTANCE SPOT WELDING USING AN ALTERNATING CURRENT POWER SUPPLY". Journal of ELECTRONIC MATERIALS, Vol. 29, No. 9, Page No.: 1090-1099, 2000.
[20]. S. j. Na and S.W. Park “A THEORETICAL STUDY ON ELECTRICAL AND THERMAL RESPONSE IN RESIST1ANCE SPOT WELDING”. WELDING RESEARCH SUPPLEMENT, Supplement To The Welding Journal, Page No.: 233s-241s August 1996
Related Articles
2023
A Mobile Application to Promote the Idea of Recycling
2023
Web Based Printing Press Management System (WBPPMS)
2023
Review: CFD Analysis Of triangular, square and Circular Shaped Helical Coil Heat Exchanger by Using Titanium Oxide Nano fluid
2023
Review: Steady and Transient Thermal Analysis of 100 Cc Engine at 3000c, 5000c & 7000c
2023
Overview of Advancement of Inventory Models for Deteriorating Items with Time Based Uniform Price
2023
