ARCHIVES
Research Article
Review: CFD Analysis of Solar Heat Exchanger by Using Different Types of Ribs In side Solar Heat Exchanger
Gourav Kumar1
Vijaykant Pandey2
1M-Tech Research Scholar, Bhabha Engineering Research Institute, Bhopal, M.P, India. 2Assistant Professor, Bhabha Engineering Research Institute, Bhopal, M.P, India.
Published Online: March-April 2023
Pages: 224-229
Cite this article
No DOIReferences
1. Varun Pratap Singh, Siddharth Jain, AshishKarn , Ashwani Kumar , GauravDwivedi, Chandan Swaroop Meena, NiteshDutt and
AritraGhosh et.al “Recent Developments and Advancements in Solar Air Heaters” Sustainability 2022 MDPI.
2. Wang, Dengjia, et al. "Evaluation of the performance of an improved solar air heater with “S” shaped ribs with gap." Solar Energy 195
(2020): 89-101.
3. Saravanakumar, P. T., D. Somasundaram, and M. M. Matheswaran. "Thermal and thermo-hydraulic analysis of arc shaped rib
roughened solar air heater integrated with fins and baffles." Solar Energy 180 (2019): 360-371.
4. Kumar, Rajesh, and Prabha Chand. "Performance prediction of extended surface absorber solar air collector with twisted tape inserts."Solar Energy 169 (2018): 40-48.
5. Aboghrara, Alsanossi M., et al. "Performance analysis of solar air heater with jet impingement on corrugated absorber plate." Case
studies in thermal engineering 10 (2017): 111-120
6. Rajesh Maithani, J.S. Saini, “Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with V-ribs
with symmetrical gaps” Experimental Thermal and Fluid Science, Volume70, Pages 220-227, 2016. (Base Paper)
7. EhsanEbrahimnia-Bajestan, Mohammad Charjouei Moghadam, Hamid Niazmand, WeerapunDaungthongsuk, SomchaiWongwises,
“Experimental and numerical investigation of nanofluids heat transfercharacteristics for application in solar heat exchangers”,
International Journal of Heat and Mass Transfer, Volume 92, Pages 1041–1052, 2016.
8. Hamdi E. Ahmed, M.I. Ahmed, M.Z. Yusoff, M.N.A. Hawlader, Habeeb Al-Ani “Experimental study of heat transfer augmentation in
non-circular duct.
9. using combined nanofluids and vortex generator” International Journal of Heat and Mass Transfer, Volume 90, Pages 1197–1206,
2015
10. AlirezaZamaniAghaie, Asghar B. Rahimi, AlirezaAkbarzadeh “A general optimized geometry of angled ribs for enhancing thethermohydraulic behavior of a solar air heater channel - A Taguchiapproach”Elsevier Renewable Energy, Volume 83, Pages 47-54, 2015.
11. AdemAcır, Ismail Ata “A study of heat transfer enhancement in a new solar air heater havingcircular type turbulators”ElsevierJournal
of the Energy Institute, Pages 1-11, 2015.
12. Anil Kumar, Man-Hoe Kim “Effect of roughness width ratios in discrete multi V-ribwith staggered rib roughness on overall thermal
performanceof solar air channel” ElsevireSolar Energy, Volume 119, Pages 399–414, 2015.
13. Dongxu Jin, Manman Zhang, Ping Wang, ShashaXu, “Numericalinvestigation of heat transfer and fluid flow in a solar airheater duct
with multi V-shaped ribs on the absorber plate”Elsevire Energy, Volume 89, Page 178-190, 2015.
14. Chao Ma, Xiaoling Chen, Jianfei Wang, ShushengZang, YongbinJi,“An experimental investigation of heat transfer characteristics for
steamcooling and air cooling in a rectangular channel roughened withparallel ribs” Experimental Thermal and Fluid Science, Volume
64, Page 142–151, 2015.
15. Li Shui-lian, Meng Xiang-rui, Wei Xin-li, “Heat transfer and friction factor correlations for solar air collectorswith hemispherical
protrusion artificial roughness on the absorber plate”ElsevireSolar Energy, Volume 118, Pages 460–468, 2105.
16. R S Gill,V S Hans, J S Saini, “Heat Transfer and Friction Characteristics ofSolar Air Heater Duct Roughened by Broken ArcShaped
Ribs Combined with Staggered Rib Piece” International Journal of Engineering Research & Technology (IJERT), Volume 4 Issue 11, Pages 604-610 , November-2015.
17. Anuj Kumar Shukla, AnupamDewan, “Computational Study Of Heat Transfer Enhancement Through Broken And Continous Attached
Ribs In A Square Channel”.
18. Arkan K. AL-Taie, Mohammad J. Kadham “Numerical Heat Transfer Enhancement In Square Duct With Internal Rib” Eastern
Academic Journal, ISSN: 2367–7384 Issue 3, Pages 87-100, October 2015.
19. TabishAlam , R.P. Saini , J.S. Saini, “Effect of circularity of perforation holes in V-shaped blockages on heattransfer and friction
characteristics of rectangular solar air heater duct”Elsevire Energy Conversion and Management, Vloume 86, Pages 952–963, 2014.
20. K.Sivakumar, Dr. E.Natarajan, Dr. N.Kulasekharan, “Heat transfer andpressuredropcomparison between smooth and differentsized
rib-roughened rectangular divergentducts” International Journal of Engineering and Technology (IJET), Volume 6 No 1, Pages 263-
272 , Feb-Mar 2014.
AritraGhosh et.al “Recent Developments and Advancements in Solar Air Heaters” Sustainability 2022 MDPI.
2. Wang, Dengjia, et al. "Evaluation of the performance of an improved solar air heater with “S” shaped ribs with gap." Solar Energy 195
(2020): 89-101.
3. Saravanakumar, P. T., D. Somasundaram, and M. M. Matheswaran. "Thermal and thermo-hydraulic analysis of arc shaped rib
roughened solar air heater integrated with fins and baffles." Solar Energy 180 (2019): 360-371.
4. Kumar, Rajesh, and Prabha Chand. "Performance prediction of extended surface absorber solar air collector with twisted tape inserts."Solar Energy 169 (2018): 40-48.
5. Aboghrara, Alsanossi M., et al. "Performance analysis of solar air heater with jet impingement on corrugated absorber plate." Case
studies in thermal engineering 10 (2017): 111-120
6. Rajesh Maithani, J.S. Saini, “Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with V-ribs
with symmetrical gaps” Experimental Thermal and Fluid Science, Volume70, Pages 220-227, 2016. (Base Paper)
7. EhsanEbrahimnia-Bajestan, Mohammad Charjouei Moghadam, Hamid Niazmand, WeerapunDaungthongsuk, SomchaiWongwises,
“Experimental and numerical investigation of nanofluids heat transfercharacteristics for application in solar heat exchangers”,
International Journal of Heat and Mass Transfer, Volume 92, Pages 1041–1052, 2016.
8. Hamdi E. Ahmed, M.I. Ahmed, M.Z. Yusoff, M.N.A. Hawlader, Habeeb Al-Ani “Experimental study of heat transfer augmentation in
non-circular duct.
9. using combined nanofluids and vortex generator” International Journal of Heat and Mass Transfer, Volume 90, Pages 1197–1206,
2015
10. AlirezaZamaniAghaie, Asghar B. Rahimi, AlirezaAkbarzadeh “A general optimized geometry of angled ribs for enhancing thethermohydraulic behavior of a solar air heater channel - A Taguchiapproach”Elsevier Renewable Energy, Volume 83, Pages 47-54, 2015.
11. AdemAcır, Ismail Ata “A study of heat transfer enhancement in a new solar air heater havingcircular type turbulators”ElsevierJournal
of the Energy Institute, Pages 1-11, 2015.
12. Anil Kumar, Man-Hoe Kim “Effect of roughness width ratios in discrete multi V-ribwith staggered rib roughness on overall thermal
performanceof solar air channel” ElsevireSolar Energy, Volume 119, Pages 399–414, 2015.
13. Dongxu Jin, Manman Zhang, Ping Wang, ShashaXu, “Numericalinvestigation of heat transfer and fluid flow in a solar airheater duct
with multi V-shaped ribs on the absorber plate”Elsevire Energy, Volume 89, Page 178-190, 2015.
14. Chao Ma, Xiaoling Chen, Jianfei Wang, ShushengZang, YongbinJi,“An experimental investigation of heat transfer characteristics for
steamcooling and air cooling in a rectangular channel roughened withparallel ribs” Experimental Thermal and Fluid Science, Volume
64, Page 142–151, 2015.
15. Li Shui-lian, Meng Xiang-rui, Wei Xin-li, “Heat transfer and friction factor correlations for solar air collectorswith hemispherical
protrusion artificial roughness on the absorber plate”ElsevireSolar Energy, Volume 118, Pages 460–468, 2105.
16. R S Gill,V S Hans, J S Saini, “Heat Transfer and Friction Characteristics ofSolar Air Heater Duct Roughened by Broken ArcShaped
Ribs Combined with Staggered Rib Piece” International Journal of Engineering Research & Technology (IJERT), Volume 4 Issue 11, Pages 604-610 , November-2015.
17. Anuj Kumar Shukla, AnupamDewan, “Computational Study Of Heat Transfer Enhancement Through Broken And Continous Attached
Ribs In A Square Channel”.
18. Arkan K. AL-Taie, Mohammad J. Kadham “Numerical Heat Transfer Enhancement In Square Duct With Internal Rib” Eastern
Academic Journal, ISSN: 2367–7384 Issue 3, Pages 87-100, October 2015.
19. TabishAlam , R.P. Saini , J.S. Saini, “Effect of circularity of perforation holes in V-shaped blockages on heattransfer and friction
characteristics of rectangular solar air heater duct”Elsevire Energy Conversion and Management, Vloume 86, Pages 952–963, 2014.
20. K.Sivakumar, Dr. E.Natarajan, Dr. N.Kulasekharan, “Heat transfer andpressuredropcomparison between smooth and differentsized
rib-roughened rectangular divergentducts” International Journal of Engineering and Technology (IJET), Volume 6 No 1, Pages 263-
272 , Feb-Mar 2014.
Related Articles
2023
A Mobile Application to Promote the Idea of Recycling
2023
Web Based Printing Press Management System (WBPPMS)
2023
Review: CFD Analysis Of triangular, square and Circular Shaped Helical Coil Heat Exchanger by Using Titanium Oxide Nano fluid
2023
Review: Steady and Transient Thermal Analysis of 100 Cc Engine at 3000c, 5000c & 7000c
2023
Overview of Advancement of Inventory Models for Deteriorating Items with Time Based Uniform Price
2023
Enhanced Dynamic Voltage Restorer for Improving the Power Quality Using RETO Algorithm
Share Article
Or copy link
https://theijire.com/archives/review-cfd-analysis-of-solar-heat-exchanger-by-using-different-types-of-ribs-in-side-solar-heat-exchanger
*Instagram doesn't support direct link sharing from web. Copy the link and share it in your Instagram story or post.