ARCHIVES
Research Article
Review: CFD Simulation of Heat Transfer In Air-Cooled Finned Four Stroke Engines
Amir Salim1
Vijaykant Pandey2
1M-Tech Research Scholar, RKDF College of Technology, Bhopal, M.P, India. 2Assistant Professor, RKDF College of Technology, Bhopal, M.P, India.
Published Online: January-February 2023
Pages: 173-177
Cite this article
No DOIReferences
1. NamanSahu*, Vishal Gupta, Pradeep Kr. Kurmi "Thermal Analysis of Engine Blades Using FEM: A Review" International Journal of
Technical Innovation in Engineering and Modern Sciences (IJTIMES) Volume 4, Issue 8, August-2018
2. Charan, Srivastav, Bharadwaj, "Thermal analysis on rectangular plate fin with holes using Ansys", International Journal of Creative
Research Thoughts, 2018.
3. K.Rama Chandra Manohar, Yakkala.M.KRaghunadh, Somanath.B, Santosh, B. Koteswararao "Optimization of engine fins for different
heat transfer and thermal conductivity" IOP Conf. Arr.: Materials Science and Engineering (2018)
4. KiranBeldar, AvinashPatil, "Design and Analysis of a Longitudinally Balanced Chamber with Rectangular Indentation", International
Journal of Scientific Development and Research (IJSDR), 2017.
5. Rajesh, Rahamathullah, MalleswaraRao, "Planning and rationalization of motor housing blades with different geometries and
materials in hot inspection", International Journal of Nuclear Engineering and Management, 2017.
6. Mayankjain, MahendraSankhala, KanhaiyaPatidar, “Blade Heat Transfer Inspection and Rationalization Dee Shape Change”,
International Journal of Mechanical and Manufacturing Engineering, Volume 5, Number 7, July 2017.
7. Komita, Reddy, "Ceramic Analysis of Chamber Disturbances Using Different Material Balances Using ANSYS," ICAAMM, Elsevier,
2016.
8. S. Ravikumar, Chandra, Harish, "Exploratory and Transient Thermal Analysis of Heat Sink Fins for CPU Processors for Better
Performance", Materials Science and Engineering, 197, 2017.
9. Sandeep Kumar, NitinDubey, "Thermal Investigation and Analysis of Heat Dissipation Rate of Single Cylinder SI Engine", IJEDR,
Volume 5, Number 2, 2017
10. Mogaji, Owoseni, "Numerical Analysis of Radiation Effects on Heat Flow Through Rectangular Profile Heat Flow", American Journal
of Engineering Research (AJER), Vol-6, No-10, pp-36-46, 2017.
11. Arefin, "Thermal analysis of modified pin heatsink for natural convection", 5th International Conference on Information Science,
Electronics and Vision, 2015.
12. Balendra Singh, Satish Singh, "Research Paper on Heat Transfer in Notched Fin and UN Notched Fin", International Journal of
Research in Applied Science and Engineering Technology (IJRASET), Volume 4, Issue 9, September 2016.
13. Kongre, Barde, "Review Paper on Thermal Analysis and Heat Transfer of Single Cylinder S. I. Motor Fins", International Journal of
Engineering Research and Technology (IJERT), Volume 4, Number 30, 2016.
14. Natrayan, Selvaraj, Alagirisamy, "Worm Analysis of Engine Fins of Various Shapes" International Journal of Innovative Research in
Science, Engineering and Technology, Volume 5, Number 5, May 2016.
15. Masao Yoshida, Soichi Ishihara, Yoshio Murakami, Kohei Nakashima and Masago Yamamoto“AirCoolingEffectsofFinsonaMotorcycleEngine”,JSME,2006,Vol.49,No.3, PP869-875.
16. K.Sathishkumar,K.Vignesh,N.Ugesh,P.B.SanjeevaprasathandS.Balamurugan“ComputationalAnalysisofHeatTransferthroughFinswithDi
fferentTypesofNotches”,International Journal of Advanced Engineering Research and Science, 2017, Vol.4, Issue.2, PP175-183.
17. MohsinA.AliandS.MKherde“designmodificationandanalysisoftwo-wheelercoolingfins-a review”, International Journal of Advances in
Engineering & Technology, 2014, Vol. 7, Issue.3, PP998-1002.
18. S Chandra sekhar, P Satish Reddy and Ch.ChandraRao “Structural and Thermal Simulationof Fins Of An Air Cooled Engine Cylinder
Under Varying Speed Conditions”, InternationalJournalof Science Engineering and Advance Technology, 2014, Vol. 2, Issue 9, PP411-
414.
19. G. Angel and N. SambasivaRao “Design and Analysis of Two-Wheeler Cooling
Fins”,InternationalJournalofEngineeringScienceandComputing,2016,Vol.6,Issue1,PP2373-2374.
20. GokulKarthik A and Dinesh R “Design Optimization and Heat Transfer Analysis
ofEngineCylinderFinsbyVaryingMaterials”,IJSRSET,2017, Vol.3,Issue3,PP55-59.
21. P.Harish, B.Ramakrishna Reddy, G.S.Md.WaseemAkram , K.MD. Hanief and
KumairNaik“OptimizationofEngineCylinderFinsofVaryingGeometryandMaterial”,InternationalJournalof Innovative Research
inAdvanced Engineering, 2014, Vol.1Issue 2, PP67-73.
Technical Innovation in Engineering and Modern Sciences (IJTIMES) Volume 4, Issue 8, August-2018
2. Charan, Srivastav, Bharadwaj, "Thermal analysis on rectangular plate fin with holes using Ansys", International Journal of Creative
Research Thoughts, 2018.
3. K.Rama Chandra Manohar, Yakkala.M.KRaghunadh, Somanath.B, Santosh, B. Koteswararao "Optimization of engine fins for different
heat transfer and thermal conductivity" IOP Conf. Arr.: Materials Science and Engineering (2018)
4. KiranBeldar, AvinashPatil, "Design and Analysis of a Longitudinally Balanced Chamber with Rectangular Indentation", International
Journal of Scientific Development and Research (IJSDR), 2017.
5. Rajesh, Rahamathullah, MalleswaraRao, "Planning and rationalization of motor housing blades with different geometries and
materials in hot inspection", International Journal of Nuclear Engineering and Management, 2017.
6. Mayankjain, MahendraSankhala, KanhaiyaPatidar, “Blade Heat Transfer Inspection and Rationalization Dee Shape Change”,
International Journal of Mechanical and Manufacturing Engineering, Volume 5, Number 7, July 2017.
7. Komita, Reddy, "Ceramic Analysis of Chamber Disturbances Using Different Material Balances Using ANSYS," ICAAMM, Elsevier,
2016.
8. S. Ravikumar, Chandra, Harish, "Exploratory and Transient Thermal Analysis of Heat Sink Fins for CPU Processors for Better
Performance", Materials Science and Engineering, 197, 2017.
9. Sandeep Kumar, NitinDubey, "Thermal Investigation and Analysis of Heat Dissipation Rate of Single Cylinder SI Engine", IJEDR,
Volume 5, Number 2, 2017
10. Mogaji, Owoseni, "Numerical Analysis of Radiation Effects on Heat Flow Through Rectangular Profile Heat Flow", American Journal
of Engineering Research (AJER), Vol-6, No-10, pp-36-46, 2017.
11. Arefin, "Thermal analysis of modified pin heatsink for natural convection", 5th International Conference on Information Science,
Electronics and Vision, 2015.
12. Balendra Singh, Satish Singh, "Research Paper on Heat Transfer in Notched Fin and UN Notched Fin", International Journal of
Research in Applied Science and Engineering Technology (IJRASET), Volume 4, Issue 9, September 2016.
13. Kongre, Barde, "Review Paper on Thermal Analysis and Heat Transfer of Single Cylinder S. I. Motor Fins", International Journal of
Engineering Research and Technology (IJERT), Volume 4, Number 30, 2016.
14. Natrayan, Selvaraj, Alagirisamy, "Worm Analysis of Engine Fins of Various Shapes" International Journal of Innovative Research in
Science, Engineering and Technology, Volume 5, Number 5, May 2016.
15. Masao Yoshida, Soichi Ishihara, Yoshio Murakami, Kohei Nakashima and Masago Yamamoto“AirCoolingEffectsofFinsonaMotorcycleEngine”,JSME,2006,Vol.49,No.3, PP869-875.
16. K.Sathishkumar,K.Vignesh,N.Ugesh,P.B.SanjeevaprasathandS.Balamurugan“ComputationalAnalysisofHeatTransferthroughFinswithDi
fferentTypesofNotches”,International Journal of Advanced Engineering Research and Science, 2017, Vol.4, Issue.2, PP175-183.
17. MohsinA.AliandS.MKherde“designmodificationandanalysisoftwo-wheelercoolingfins-a review”, International Journal of Advances in
Engineering & Technology, 2014, Vol. 7, Issue.3, PP998-1002.
18. S Chandra sekhar, P Satish Reddy and Ch.ChandraRao “Structural and Thermal Simulationof Fins Of An Air Cooled Engine Cylinder
Under Varying Speed Conditions”, InternationalJournalof Science Engineering and Advance Technology, 2014, Vol. 2, Issue 9, PP411-
414.
19. G. Angel and N. SambasivaRao “Design and Analysis of Two-Wheeler Cooling
Fins”,InternationalJournalofEngineeringScienceandComputing,2016,Vol.6,Issue1,PP2373-2374.
20. GokulKarthik A and Dinesh R “Design Optimization and Heat Transfer Analysis
ofEngineCylinderFinsbyVaryingMaterials”,IJSRSET,2017, Vol.3,Issue3,PP55-59.
21. P.Harish, B.Ramakrishna Reddy, G.S.Md.WaseemAkram , K.MD. Hanief and
KumairNaik“OptimizationofEngineCylinderFinsofVaryingGeometryandMaterial”,InternationalJournalof Innovative Research
inAdvanced Engineering, 2014, Vol.1Issue 2, PP67-73.
Related Articles
2023
A Mobile Application to Promote the Idea of Recycling
2023
Web Based Printing Press Management System (WBPPMS)
2023
Review: CFD Analysis Of triangular, square and Circular Shaped Helical Coil Heat Exchanger by Using Titanium Oxide Nano fluid
2023
Review: Steady and Transient Thermal Analysis of 100 Cc Engine at 3000c, 5000c & 7000c
2023
Overview of Advancement of Inventory Models for Deteriorating Items with Time Based Uniform Price
2023
